Save Up To 35% On All Lockpicks, Free shipping over $39.99!
Like Us on Facebook to enjoy 5% discount

How to use a Lockpick Gun: Ways to Open Locks With a Lockpick Gun

2022-06-07 08:39


How does a lock pick work? How do you open a lock with a pick? Are lock pick guns easy to use? These are three questions concerning lockpick gun, if you are interested in, please keep reading!
 
Section 1: How a Pin-Tumbler Lock Works
A traditional lock pick uses trial-and-error methods to find the correct alignment of the locking pins. The snap gun uses a primary law of physics, the transfer of energy, to momentarily burst all of the driver pins out of the lock cylinder without sending the bottom pins up into it. The snap gun strikes all of the bottom pins at once with a strong impact, and then withdraws again. The bottom pins transfer their kinetic energy to the top pins and come to a complete stop without penetrating the lock housing. The driver pins are thrown out of the cylinder body entirely up into the lock housing. Until the springs force the driver pins back into the cylinder, the lock cylinder is momentarily unobstructed.
 
Section 2: How Lock Picking Guns Work
A lock picking gun works on the principal of inertia or for example Newton’s Cradle. The steel rod from the lock picking gun strikes the pins simultaneously when you pull the trigger. Hitting each pin so quickly it separates the pins allowing you catch the pins above the shear line of the lock with your tension wrench and open the lock. Depending on the kind of pins inside the lock you might have to strike the pins multiple times, to get all the pins above the shear line and open the lock. But the principal still works the same. A lock picking gun speeds up the time it takes to pick a lock, but not all locks can be picked with a lock picking gun. Locks with Serarated pins or that are counter drilled can be very difficult to almost impossible to pick with any lock picking gun.
 
What Are the Different Types of Lockpick Guns?
There are two main flavors of lockpick guns out there: manual and electric. The only difference is that a manual lockpick gun requires you to squeeze the trigger every time that you want to “fire”. An electric lockpick gun is something akin to a full-auto machine gun. All you have to do there is hold onto a button and the lockpick gun will fire over and over again.
 
The benefit to this is that it virtually always takes multiple trigger pulls to get a lock open with a lockpick gun. There’s only been a handful of times I’ve successfully gotten a lock opened on the first squeeze. Most of the time it takes me 12+ squeezes until I can get the lock open, and it’s not uncommon for it to take well more than that.
 
This is where the electric lockpick gun shines. If it’s going to take you a lot of fiddling around with the proper amount of tension and angle of the lockpick gun to get the lock opened you can be more efficient on your end by squeezing off 100 rounds electrically compared to squeezing off 30 rounds manually within that same time frame.
 
At lockpickmall.com, you can find both manual and electric lockpick gun with the cheapest price ever! Lock Pick Gun for Sale, purchase with free shipping now!