Like Us on Facebook to enjoy 5% discount
How to Pick a Car Lock with a coat hanger
2021-12-15 08:41
How do you unlock a car door with a hanger? If you lost the car key or forget the key in somewhere, so how do you unlock you car door? In this article, you will be introduced to unlock a car lock with a coat hanger!
Stretch out the wire so that it is long enough to reach the unlock button or the post. Untwist the hooked portion, then straighten it completely, leaving only the curved end in its original shape. To unwind the part of the wire hanger that is twisted around itself, it helps to use a pair of pliers. The coat hanger should be shaped like a relatively straight line with a curved hook on the end when you’re done. (You may want to wear gloves while untwisting the hanger to avoid poking yourself in the hand. Using pliers will make untwisting the hanger easier.)
2. Bend the hook into “V” shape:
Bend the hook of your coat hanger into a shape that can grip the door lock post. A small “V” shape would be perfect to have an excellent grip, plus it can also fit through the small gap of the door, which can easily do the job. A pair of pliers would do the job here; it can help you fold the end of the straightened hanger into the V shape. Most door locks have a small channel that will make it easier to grip when you are using a coat hanger to unlock the door. You can also change the hanger shape in a few other shapes or checkmarks until you have the perfect shape that will grip the most.
3. Pry the window out slightly if it is closed:
Now you need to open the window, if the window is already open then you don't need to pry it open, but if it is closed then you need to slide a narrow piece of wood or whatever into the gap between the window and the door and then then pry the window away from the vehicle but do it carefully. If you put too much pressure on the window, it must break. Use a wider pry face, such as a paint scraper; It's a better choice than a narrow screwdriver. After opening the window, place a piece of folded cloth or rubber to keep the window open.
4. Slide the hanger into the gap
Hold the end of the hanger, as opposed to the "V" shape you made with pliers. Slide the hanger into the gap you made between the window and the door frame.
Now, if your lock post is near the back of the door, try to approach it from the front. It is very important that you arrive at the lock post in a direction that allows you to apply pressure easily as you pull up the lock. But make sure you don't put extra pressure on the window while it's being pried open, or you might break it too.
5. Catch the post and pull up and toward the back of your car
Move the hanger around the post until you grab it, then apply pressure by pulling it back to the back of the car. Now, if the lock is too close to the back of the window, apply forward pressure as you pull up.
Continue to apply pressure as you pull up the column to unlock the door. If a post pops up, the door is unlocked and you can easily open it. If it is not open, you need to capture the post multiple times.
6. Press the unlock button if you can reach it:
Place the bent hanger through the crack in the window and try hitting the unlock button with the wire tip. But be patient. It may take a while to reach the button and successfully click it. If you find it difficult to press the unlock button with the tip of the wire, try attaching a small rubber to the end.
Wrap a small rubber band around the tip for friction, or stick an eraser on the end; This will increase your grip on the button surface, and you can unlock it easily, and you don't need a key to open the door.
Or, you can equip yourself with a Car Lock Picks set in case of urgent need! If you want to get them with the cheapest price, lockpickmall.com will help you to save up to 30% off!
Stretch out the wire so that it is long enough to reach the unlock button or the post. Untwist the hooked portion, then straighten it completely, leaving only the curved end in its original shape. To unwind the part of the wire hanger that is twisted around itself, it helps to use a pair of pliers. The coat hanger should be shaped like a relatively straight line with a curved hook on the end when you’re done. (You may want to wear gloves while untwisting the hanger to avoid poking yourself in the hand. Using pliers will make untwisting the hanger easier.)
2. Bend the hook into “V” shape:
Bend the hook of your coat hanger into a shape that can grip the door lock post. A small “V” shape would be perfect to have an excellent grip, plus it can also fit through the small gap of the door, which can easily do the job. A pair of pliers would do the job here; it can help you fold the end of the straightened hanger into the V shape. Most door locks have a small channel that will make it easier to grip when you are using a coat hanger to unlock the door. You can also change the hanger shape in a few other shapes or checkmarks until you have the perfect shape that will grip the most.
3. Pry the window out slightly if it is closed:
Now you need to open the window, if the window is already open then you don't need to pry it open, but if it is closed then you need to slide a narrow piece of wood or whatever into the gap between the window and the door and then then pry the window away from the vehicle but do it carefully. If you put too much pressure on the window, it must break. Use a wider pry face, such as a paint scraper; It's a better choice than a narrow screwdriver. After opening the window, place a piece of folded cloth or rubber to keep the window open.
4. Slide the hanger into the gap
Hold the end of the hanger, as opposed to the "V" shape you made with pliers. Slide the hanger into the gap you made between the window and the door frame.
Now, if your lock post is near the back of the door, try to approach it from the front. It is very important that you arrive at the lock post in a direction that allows you to apply pressure easily as you pull up the lock. But make sure you don't put extra pressure on the window while it's being pried open, or you might break it too.
5. Catch the post and pull up and toward the back of your car
Move the hanger around the post until you grab it, then apply pressure by pulling it back to the back of the car. Now, if the lock is too close to the back of the window, apply forward pressure as you pull up.
Continue to apply pressure as you pull up the column to unlock the door. If a post pops up, the door is unlocked and you can easily open it. If it is not open, you need to capture the post multiple times.
6. Press the unlock button if you can reach it:
Place the bent hanger through the crack in the window and try hitting the unlock button with the wire tip. But be patient. It may take a while to reach the button and successfully click it. If you find it difficult to press the unlock button with the tip of the wire, try attaching a small rubber to the end.
Wrap a small rubber band around the tip for friction, or stick an eraser on the end; This will increase your grip on the button surface, and you can unlock it easily, and you don't need a key to open the door.
Or, you can equip yourself with a Car Lock Picks set in case of urgent need! If you want to get them with the cheapest price, lockpickmall.com will help you to save up to 30% off!