How to Pick a Car Lock With a Bobby Pin

Want to know how to pick a car lock with a hairpin? This method can actually save you from the hassle of losing your car keys. However, it only works with traditional car locks. When doing so, just focus on creating tension rods and picking tools using hairpins.
 
What You Need
In order to successfully open the car door with a hairpin, you need to have the right tools. These things are easy to find, so you don't need to waste too much time looking for them. Check out the nearest hardware store nearby, or bring it just in case.
 
Hairpins- You will need to use two hairpins to create the picking tool. They must be made of metal so that they won't break when you pick the lock. You must also use pliers or bare hands to remove the rubber tips to prevent them from getting stuck in the keyhole. If you don't have a hair clip, you can use a metal paper clip. They must also be strong enough not to be broken. In terms of size, a large paper clip must be selected to successfully open the door.
 
Pliers- Using pliers allows you to bend the hairpin pins more easily. In this tutorial, the best pliers you can use are a pair of needle-nose pliers. It is usually used to make jewelry and handicrafts because of its ability to bend thin metals. Because you will not work in a small space, you can use straight needle nose pliers. The ideal tool is 6 inches long. If you don't have any needle-nose pliers available, you can also bend the hairpin with your bare hands. Be careful, don't hurt your hands.
 
What to Do
Step 1: Use a hairpin to make a tie rod and a lock picking tool
Create a tension rod:
Get a hairpin and bend the top one third to make it look like a hook.
Bend both sides of the hairpin in the same direction.
When shifting the fork, separate one of the hairpins until it looks like an "L".
Insert one centimeter of the top of the hairpin into the keyhole, and then bend it.
 
Step 2: Insert the lever at the bottom of the keyhole
After you finish your picking tool:
Insert the lever at the bottom of the keyhole.
Turn it clockwise.
Apply the right amount of pressure to the tension rod until the end of the tutorial. Make sure that the pressure is consistent throughout the process, because applying too much or too little will prevent you from opening the car lock.
 
Step 3: Put the lock picking tool above the keyhole
You can now insert the keyhole in the upper part of the pick. Move the pickup up and down. You may need some time before you move the bucket and get the correct combination. If your car has a different locking mechanism, this can also be a challenge. Continue to do this step until you successfully open the door.
 
Or, you think this way is difficult to grasp, you can also use cheap Lock Picks at lockpickmall.com, these lock pick sets can be obtained with instant delivery now!