How to make a lock pick tool with a paper clip

Have you forgotten your keys and lost them? Don't panic. You can pick a lock quickly with a paper clip. If you can find a paper clip, you can pick a lock like in the movies. It might be a shame to break in, but it's enough to get yourself in your own house. This article shows you how to make a lock pick with a paper clip, but don't try this trick on someone else's door lock.
 
1 Bend a large paper clip to look like a Lock pick tool. The method is to straighten the large circle of the paper clip twice, allowing the straightened part to stretch out.

 

2. Straighten another large paper clip to make a torque wrench. The torque wrench is the booster used to pull the lock picker. You need to press the torque wrench to drive the lock picker in front to pick the lock.

 

Straighten both ends until you have two side - by - side wires. Use a spanner to press the bend into a 90-degree turn of about 1cm.

 

3. Insert the torque wrench into the bottom of the lock and apply rotating pressure to one side. A little pressure will do. If you know which way the key is turning, turn the key in that direction. If you don't know, try each one, and you have a 50-50 chance of success. If you have a keen sense, you can sense the direction of the lock by rotating it. First turn clockwise, then try counterclockwise. If you spin it in the right direction, there's less resistance.

 

4. Keep pressure on the torque wrench, insert the paper clip into the upper lock hole, and begin to "find the position". This part is to insert the lock pick tool into the bottom of the lock hole, attach it to the top, and quickly pull it out to test the lock interior. Repeat a few times to shift some of the pins inside. Keep the wrench under pressure and try to locate the bolt with a picklock pin. Most U.S. locks have at least five bolts that need to be tested to open the lock.

 

5. Test the bolt position one by one from the inside and press down. Remember to hold the wrench pressure while doing this, and press the bolt into the lock position. You will feel a slight elastic sensation and even hear a slight clicking sound.
 
Experienced lock-pickers can do it briskly in one go, but novices need to try out all the bolts slowly.
 
6. Apply more and more pressure with a wrench. Each time you touch the bolt, shake the crowlock pin until it opens. When you hear a click, remember to turn the wrench to open the lock.
 
If you find it difficult to make a lock pick tool by yourself, you now have a chance of getting it with cheapest price at lockpickmall.com! Lock Picking Tools for Sale here, you will be amazed by the super fast delivery and biggest deals price!